Installation Manual Version 001 BRUKER 9 (167)
2
Introduction 2
BRUKER Automatic Sample Changer 2.1
The BRUKER Automatic Sample Changer, used in conjunction with BRUKER
XWINNMR software, provides dialog-guided facilities which allow the user to eas-
ily and effectively perform automatic (continuous) experiments. Features include a
60 or 120 sample capacity, random accessing of samples, positive sample identi-
fication with the optional barcode reader, and temperature control of individual
samples with the optional sample heater unit.
The standard NMR software includes the comprehensive automation package re-
quired for the Automatic Sample Changer. It features automatic instrument optimi-
zation, phasing, integration and plotting. Specialized routines assist data
interpretation. Easy set-up procedures are accomplished via dialog software at
three user-interface levels.
Site Considerations 2.2
The Automatic Sample Changer should be setup in a standard laboratory environ-
ment. Maximum room temperature should not exceed 30°C. For more information
refer to the Avance Spectrometer manual on site planning.
Contact for Additional Technical Assistance 2.3
For further technical assistance, please contact us at:
BRUKER Analytik GmbH
Siberstreifen
D-76287 Rheinstetten
Tel.: [+49] 721 5161 0
Fax: [+49] 721 5171 01
To Next Page
Loading...
Need help?
General