8 (167) BRUKER Installation Manual Version 001
Declaration of Conformity
DECLARATION OF CONFORMITY
The undermentioned products
conform to the main requirements set by the commission for
the Harmonization of Regulations of the EU Member States
with regards to electromagnetic compatibility regulations
(EMI: 89/336/ECC), safety regulations (Low Voltage Electrical
Equipment: 72/23/ECC), and machinery directives (89/392/EEC).
For the assessment the following norms were applied:
EMI: EN 55 011; EN 50 082 - 1
Safety: EN 61 010 - 1
Machinery Directives: EN 292 - 1 & 2
Test report: UNI KA
Documentation: Docu Standard:
Manufacturer’s Name: Bruker Analytik
Manufacturer’s Address: 76287 Rheinstetten, Akazienweg 2,
Germany
Declaration approved by:
Dr. Tonio Gianotti
Head of Development
Rheinstetten
(Signature)
B-ACS 60 Sample Changer H1080
B-ACS 60/500 Sample Changer SAG H41000
B-ACS 60/500 Sample Changer Magnex H31080
B-ACS 60/600 Sample Changer OXF H11080
B-ACS 60/600 Sample Changer Magnex H21080
B-ACS 60/600 Sample Changer SAG H5895
B-ACS 60/700 Sample Changer SAG H51080
B-ACS 120 Sample Changer H800
B-ACS 120/500 Sample Changer Magnex H3800
B-ACS 120/500 Sample Changer SAG H6800
B-ACS 120/600 Sample Changer H1800
B-ACS 120/600 Sample Changer Magnex H8800
B-ACS 120/600 Sample Changer SAG H4800
B-ACS 120/700 Sample Changer SAG H9800
July 21, 1995
Z31285
Sample Changer
9522
To Next Page
Loading...