54 (167) BRUKER Installation Manual Version 001
Software Commands
50. Bar Code Reader Not Present
An attempt was made to call a command related to the bar code reader
even thought this is not installed.
51. Invalid Command
The received command was invalid.
52. Invalid Parameter
The command contained an invalid or incorrect parameter.
53. Timeout RS232 ASPECT 3000
A time-out error of the RS232 host TTY has occurred.
54. Horizontal Optic Not Present
The test program for the horizontal optic was called, even though no option
is installed on the B-ACS 60.
To Next Page
Loading...