Notes:
• Names may contain up to 27 alphanumeric characters, hyphens (-), and underscores (_). Multibyte characters are
supported. The first character should not be a symbol.
• When you click the Option 1 tab, you can enter the folder description. Descriptions may contain up to 75
alphanumeric characters, hyphens (-), underscores (_), and spaces. Multibyte characters are supported. The first
character should not be a space.
• You may create up to 400 shared folders. However, if there are a large number of created shared folders, folders
may take a longer time (up to 20 minutes) to access.
• If the names of shared folders accessed via FTP connections contain multibyte characters, configure the client
language in Management > Name/Time/Language to match the characters. If the setting and display language do
not match, the shared folder name will not be displayed correctly.
• The following characters are handled differently by macOS and Windows devices. Avoid using these characters
when sharing data between macOS and Windows devices:
― ～ ∥ － ￠ ￡ ￢
• Windows does not support some characters that macOS and the LinkStation allow. If you create a filename on a
macOS device that includes any of the following symbols, it will not display correctly on a Windows computer.
You may have to connect to the LinkStation via non-SMB connections such as FTP in order to display or copy files
that contain these symbols in their filenames.
? ] [ / \ = + > < ; : " , | *
• Do not use any of the following words for the name of a shared folder as these words are reserved for internal use
by the LinkStation: authtest, global, homes, info, lost+found, lp, msdfs_root, mt-daapd, printers, ram, recorded,
spool, usbdisk x (where “x” is a number, for example: usbdisk1)
• Don’t use the following unsupported characters in shared folder names, workgroup names, or filenames:
①②③④⑤⑥⑦⑧⑨⑩⑪⑫⑬⑭⑮⑯⑰⑱⑲⑳ⅠⅡⅢⅣⅤⅥⅦⅧⅨⅩ
ⅰⅱⅲⅳⅴⅵⅶⅷⅸⅹ㎜㎝㎞㎎㎏㏄㎡№㏍℡㊤㊥㊦㊧㊨㈱㈲㈹㍾㍽㍼㍻㍉㌔㌢㍍㌘㌧㌃㌶㍑㍗㌍㌦㌣㌫㍊
㌻￤＇＂〝〟∮Σ∟⊿
纊褜鍈銈蓜俉炻昱棈鋹曻彅丨仡仼伀伃伹佖侒侊侚侔俍偀倢俿倞偆偰偂傔僴僘兊兤冝冾凬刕劜劦勀勛匀匇匤
卲厓厲叝﨎咜咊咩哿喆坙坥垬埈埇﨏塚增墲夋奓奛奝奣妤妺孖寀甯寘寬尞岦岺峵崧嵓﨑嵂嵭嶸嶹巐弡弴彧德
忞恝悅悊惞惕愠惲愑愷愰憘戓抦揵摠撝擎敎昀昕昻昉昮昞昤晥晗晙晴晳暙暠暲暿曺朎朗杦枻桒柀栁桄棏﨓楨
﨔榘槢樰橫橆橳橾櫢櫤毖氿汜沆汯泚洄涇浯涖涬淏淸淲淼渹湜渧渼溿澈澵濵瀅瀇瀨炅炫焏焄煜煆煇凞燁燾犱
犾猤猪獷玽珉珖珣珒琇珵琦琪琩琮瑢璉璟甁畯皂皜皞皛皦益睆劯砡硎硤硺礰礼神祥禔福禛竑竧靖竫箞精絈絜
綷綠緖繒罇羡羽茁荢荿菇菶葈蒴蕓蕙蕫﨟薰蘒﨡蠇裵訒訷詹誧誾諟諸諶譓譿賰賴贒赶﨣軏﨤逸遧郞都鄕鄧釚
釗釞釭釮釤釥鈆鈐鈊鈺鉀鈼鉎鉙鉑鈹鉧銧鉷鉸鋧鋗鋙鋐﨧鋕鋠鋓錥錡鋻﨨錞鋿錝錂鍰鍗鎤鏆鏞鏸鐱鑅鑈閒隆
﨩隝隯霳霻靃靍靏靑靕顗顥飯飼餧館馞驎髙髜魵魲鮏鮱鮻鰀鵰鵫鶴鸙黑畩秕緇臂蘊訃躱鐓饐鷯
• File and folder names may contain up to 255 single-byte characters.
• Folder and workgroup names whose names contain multibyte characters may not be displayed correctly.
• If shared folders are accessed from a macOS device, information files for the macOS device may be generated
automatically. Do not delete these files. If they are deleted from a Windows device, this may prevent further
access from a macOS device.
• The LinkStation belongs to the default zone in AppleShare; the zone cannot be specified.
• When files are copied to the LinkStation or to a USB drive connected to the LinkStation, file information such as
date created, date modified, and other date information may be updated or changed.
• During a file transfer, if settings are changed, the file transfer operation may be aborted.
• File copying to the LinkStation is protected by a journaling file system. If the Ethernet cable is disconnected or a
power outage occurs while copying data, the following may occur:
◦ Preset data such as the LinkStation name, users, and groups may be erased.
◦ An incomplete file may be copied and the file can no longer be deleted. If this occurs, restart the LinkStation,
delete the file, and perform the copy operation again.
26
To Next Page
Loading...
