4 Enter the desired BuffaloNAS.com name.
5 Select “Configure a router's port settings manually”, enter the router’s port number, and tap OK.
6 When configuring the required settings on the Buffalo NAS device is finished, next configure the router using
the port number set at step 5 above.
FTP
By default, the LinkStation’s shares are only accessible by users connected to the same network or router as the
LinkStation. The optional FTP server allows users outside the local network to access the LinkStation.
Note: FTP is intended for users who already have FTP client software and have experience with it.
1 From Settings, click File Sharing.
2 Move the FTP switch ( ) to the position to enable FTP.
133
Chapter 5 Cloud Services and Remote Access
To Next Page
Loading...
