Buffalo LS720D0802 - Configuring Actions for if a Drive Used for the RAID Array Has Not Been Detected

1 From Settings, click Storage.
2 Click the settings icon ( ) to the right of “RAID”.
3 Click Options.
4 Click Edit.
5 Change the “Error Behavior” option to “Shut down” and click OK.
Configuring Actions for If a Drive Used for the RAID Array Has Not
Been Detected
You can configure actions to be taken by the LinkStation if a drive used for the RAID array cannot be mounted when
booting.
47
Chapter 3 RAID Modes and Drive Management