Displaying or Hiding the Confirmation Screen
Configure to display or hide the confirmation screen that showcases the actions for if a drive used for the RAID array
cannot be mounted when booting. The confirmation screen is configured to appear by default. To hide the screen,
follow the procedure below.
1 From Settings, click Storage.
2 Click the settings icon ( ) to the right of “RAID”.
3 Click Options.
4 Click Edit.
5 Change the “Drive Detection Action Settings” option to “Don't prompt when a drive could not be detected”
and click OK.
48
Chapter 3 RAID Modes and Drive Management
To Next Page
Loading...
