• Examples of timer settings are shown below:
◦ Example 1:
If running at a current time of 10:00 a.m. Wednesday
Timer 1: Daily 12:00–24:00
Timer 2: Not used
Timer 3: Not used
No operation is performed at 12:00 p.m. and the unit enters sleep mode at 12:00 a.m.
◦ Example 2:
If running at a current time of 10:00 a.m. Wednesday
Timer 1: Daily 9:00–18:00
Timer 2: Wednesday 10:00–20:00
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 a.m. and the unit enters sleep mode at 6:00
p.m. On Wednesday, the unit enters sleep mode at 8:00 p.m.
◦ Example 3:
If running at a current time of 10:00 a.m. Wednesday
Timer 1: Daily 9:00–18:00
Timer 2: Wednesday 10:00–1:00 a.m. of the next day
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 a.m. and the unit enters sleep mode at 6:00
p.m. On Wednesday, normal operation begins at 10:00 a.m. and the unit enters sleep mode at 1:00 a.m. of
the next day.
◦ Example 4:
If running at a current time of 10:00 a.m. Wednesday
Timer 1: Daily 9:00–18:00
Timer 2: Wednesday 7:30–22:00
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 a.m. and the unit enters sleep mode at 6:00
p.m. On Wednesday, normal operation begins at 7:30 a.m. and the unit enters sleep mode at 10:00 p.m.
• To wake the LinkStation from sleep mode before the wake-up time, press the function button.
UPS (Uninterruptible Power Supply)
If a UPS (sold separately) is attached, the LinkStation can be automatically shut down to protect data in the event of
a power outage.
Note: When the LinkStation restarts after an automatic shutdown such as from a power outage or power supply
issue, verify that external power has been restored. If the LinkStation is turned on while it is still running on the UPS
and external power has not been restored, the automatic shutdown will not be performed, even after the specified
time elapses.
1 Plug the power cable of the UPS to a wall socket.
2 Connect the AC adapter of the LinkStation to the UPS.
3 Connect the UPS and the LinkStation using a USB cable.
4 Turn on the UPS, then the LinkStation.
170
Chapter 9 Advanced Features
To Next Page
Loading...
