13 Power Status LED
Glows green when the power cable is connected.
14 Anti-Theft Security Slot
Use this slot to secure your LinkStation with a cable lock (not included).
15 Drive 1 Error LED
If there is an error on the drive in slot 1, this LED will light.
16 Drive 2 Error LED
If there is an error on the drive in slot 2, this LED will light.
Installing Software
NAS Navigator2
For Windows
1 Go to the d.buffalo website (https://d.buffalo.jp/LS700/) to download the installer.
2 Select the region and model to go to your specific model’s d.buffalo website.
3 Download the NAS Navigator2 installer and install it onto your computer.
Refer to the software help for more detailed information on operating the software. To open the help, launch NAS
Navigator2 and navigate to Menu > Help.
For macOS 10.13 and Later
1 Open Mac App Store and search for the NAS Navigator2 software.
2 Click GET, then INSTALL.
Refer to the software help for more detailed information on operating the software. To open the help, launch NAS
Navigator2 and navigate to Help > NAS Navigator2 Help from the menu bar.
SmartPhone Navigator
SmartPhone Navigator will allow you to open LinkStation’s Settings, change the IP address, and configure
WebAccess settings from a mobile device. Follow the procedure below to install the app.
1 Open App Store (iOS or iPadOS devices) or Google Play (Android devices).
2 Search for and install “SmartPhone Navigator”.
You can also install the apps from the QR codes below. Use the appropriate QR code for your mobile device.
For iOS and iPadOS
11
Chapter 1 Getting Started
To Next Page
Loading...
