Burkert 8681 - Access to Further Parameters (Cyclic and Acyclic)

117
büS/CAN open-Design
→ Currentparametervaluescanbereadoutdirectlyattherightmargin;
Parameters with a pen symbol
can be overwritten with the appropriate authorisation or
stepsequences can be started.
→ A restartisrequiredafterafactoryresetandinordertoactivatechangesofbus/communication
settings.
15.20.4 Access to further parameters (cyclic and acyclic)
Inadditiontothepredenedrelevantparameters,furthervaluescanbereadoutandpartiallyoverwritten.
Accessisvia“BürkertCommunicator”ore.g.viaLogixDesigner.
Therequiredeldbusaddresses(aswellasindices/sub-indices)areshowninaParameter list that cor-
responds to the respective gateway conguration. Thisparameterlistandotherlescanbefoundonthe
Bürkertwebsite-entertherespectiveIDnumberofthepreconguredgatewayassearchtermanddownload
therequiredlesfromtheZIPcontainerunder“Downloads”/“Software”.
An Object list for CANopenandotherrequiredlesfortheType8681büS/CANopencanbefoundonthe
Bürkertwebsite–enterthetype“8681”ortheIDnumberofthedeviceassearchtermanddownloadthecor-
respondinglesafteropeningtheZIPcontainerwiththe“InitiationFiles”,foundunder“Downloads”/“Software”.
english
Control Head Type 8681