Burkert 8681 - Additional Warning Signs

23
Technical Data
Details of the Directives:
ATEX Directive 2014/34/EU
Ignitionprotectiontype: GasATEXcategory3G ExnAIICT4GcX
         DustATEXcategory3D ExtcIIICT135°CDcX
FM - Factory Mutual
NI/I/2/ABCD/T5;+5°C<Ta<55°CIP64
(cablesandcableglandsarenotpartoftheFMapprovalofthedeviceandare
thereforenotttedatthefactory.)
c UL us - Underwriters Laboratories (Canada and USA)
UL 61010-1 AND CSA C22.2 NO. 61010-1
Restrictions: Application area: 0 to +55°C,
Indoor use,
power supply with class-2 power supply unit
6.4 Additional warning signs
Additional signs indicate additional approvals and special operating conditions.
Warning sign for use of the device in potentially explosive atmosphere
Line 1
Line 2
Line 3
Line 4
Line 1 SpecicationsaccordingtoATEXdirective(gas)/ambienttemperature
Line 2 SpecicationsaccordingtoATEXdirective(dust)/degreeofprotectionspecication
Line 3 WARNING – POTENTIAL ELECTROSTATIC CHARGING
Line 4 HAZARD – SEE INSTRUCTIONS
Additional plate for devices with UL approval
ULlabelwithULleno.
Note on use of power supply unit according to
NEC Class 2
Permissiblesupplyvoltage(24VDC)
english
Control Head Type 8681