Burkert 8681 - Page 13

13
Basic Safety Instructions
NOTE!
Electrostatic sensitive components/modules!
•
Thedevicecontainselectroniccomponentswhichreactsensitivelytoelectrostaticdischarge(ESD).Contact
with electrostatically charged persons or objects may be hazardous to these components. In the worst
case scenario, they will be destroyed immediately or will fail after start-up.
•
ObservetherequirementsinaccordancewithEN61340-5-1tominimiseoravoidthepossibilityofdamage
caused by sudden electrostatic discharge!
•Also ensure that you do not touch electronic components when the operating voltage is on!
NOTE!
Risk of damage to property!
•Do not connect any mechanically rigid connection parts, in particular those with long lever arms, as
suchconnectionscouldgeneratetorquesthatmightdamagethecontrolhead.
•Donotsupplythemediumconnectionsofthesystemwithliquidsoraggressiveorammablemedia!
•Donotsubjectthehousingtomechanicalloads(e.g.byplacingobjectsonitorstandingonit).
•Do not make any external changes to the housings of the device. Do not paint housing parts or screws.
•Only use compatible cleaning agents for cleaning the securely closed control head and always rinse
thoroughly with clean water.
english
Control Head Type 8681