CAKEWALK PRO AUDIO - Page 206

6-24
9. If you are replacing a groove, verify that you want to delete the
existing version.
10. Click Close when you are done to return to the Groove Quantize
dialog box.
Pro Audio stores the groove in the file and chooses the new groove as
the current groove source.
To Copy an Existing Groove...
1. Choose Edit-Groove Quantize to display the Groove Quantize
dialog box.
2. Choose the groove file and groove pattern you want to copy.
3. Click the Define button to display the Define Groove dialog box.
4. Select an existing groove file, or enter the name for a new groove
file.
5. Enter a pattern name, or choose an existing pattern to replace.
6. Click OK.
7. If you are replacing a groove, verify that you want to delete the
existing version.
8. Click Close when you are done to return to the Groove Quantize
dialog box.
Pro Audio stores the groove in the file and chooses the new groove as
the current groove source.
To Delete a Groove...
1. Choose Edit-Groove Quantize to display the Groove Quantize
dialog box.
2. Click the Define button to display the Define Groove dialog box.
3. Select the file containing the groove to delete.
4. Select the pattern name of the groove.
5. Click the Delete button, and confirm that you want to delete the
groove pattern.
6. Repeat steps 3 to 5 for each groove you wish to delete.
7. Click Close when you are done to return to the Groove Quantize
dialog box.