6-40
To Insert a Controller Value...
1. In the Controllers pane, choose the data type, controller or xRPN
number, and channel (if applicable) from the lists in the toolbar.
2. Select the tool or the tool.
3. Click in the Controllers pane view at any desired time point and
value.
Pro Audio adds a controller at the indicated point.
To Draw a Linear Series of Controllers...
1. Choose the data type, controller or xRPN number, and channel (if
applicable) from the lists in the toolbar.
2. Select the tool.
3. Drag a line in the Controllers pane from the starting time and
value to the ending time and value.
Pro Audio adds a series of controllers and erases any existing
controller values in the same time interval.
To Draw a Series of Controller Value Changes...
1. Choose the data type, controller or xRPN number, and channel (if
applicable) from the lists in the toolbar.
2. Select the tool.
3. Drag the cursor across the Controllers pane, adjusting the value
as you move left to right.
Pro Audio adds a series of controllers and erases any existing
controller values in the same time interval.
To Insert a Series of Controllers...
Tip:
When using the tool, you can press and hold the Shift key to draw
a straight line.
To Next Page
Loading...