6-39
Editing Events
To Display Controller, RPN, NRPN, Velocity, Pitch-Bend,
or Aftertouch Data…
1. Select the track whose controller or xRPN data you want to see
by clicking on the track number in the Track view.
2. Choose
View-Piano Roll
to display the Piano Roll view.
3. Drag the horizontal splitter bar so that the Controllers pane is
visible.
4. Choose the data you want to see according to the table:
To see this… Do this…
Controller data Choose Control from the first drop-
down list in the toolbar, and then
choose the controller and channel
from the second and third drop-down
lists
RPN or NRPN data Choose RPN or NRPN from the first
drop-down list in the toolbar, choose
which RPN or NRPN you want from
the second drop-down list, and
choose the channel from the third
drop-down list
Velocity data Choose Velocity from the first drop-
down list
Pitch-bend data Choose Wheel from the first drop-
down list, and the MIDI channel from
the third drop-down list
Aftertouch data Choose ChanAft from the first drop-
down list, and the MIDI channel from
the third drop-down list
Pro Audio displays the data in the controllers pane.
To Display Automation Data...
1. In the Console view, right-click a control to display the pop-up
menu.
2. Choose
Edit Automation Data
.
Pro Audio opens a new Controllers pane and configures it to display
automation data for the control.
To Next Page
Loading...