C-9
Advanced Setup
Each MIDI device should be set to a unique MIDI channel or range of
channels to avoid note-doubling. Refer to the manuals for your MIDI
devices for information on how to set their MIDI channels.
Your MIDI interface may have a Thru jack as well as In and Out jacks. If
your master keyboard lacks MIDI Thru, you can add more MIDI
modules to your setup by connecting the MIDI interfaceÕs Thru to the
Þrst moduleÕs In. You can then chain subsequent modules onto the Þrst
module, as described earlier.
If your master keyboard now seems to double notes (they sound thicker),
or if you can play only one half as many notes at once, Þrst make sure
that no MIDI channel is being used by more than one of your MIDI
devices. If no MIDI channel is assigned to duplicate devices and you hear
doubling or only half as many notes as you should, see ÒMy Keyboard
Doubles Every Note I PlayÓ on page A-5.
If Your Keyboard Doesn’t Have a MIDI Thru Jack
If your keyboard has only two MIDI jacksÑIn and OutÑor if you have
only one keyboard, use the following diagrams instead:
To Next Page
Loading...