COOLU;.~QillgJbg0C"aln&QI","elt"iJl}Jj~~QJJJJlSL~tt:1&f~QJtwate"""&k~
1.
power
the
camcorder
from
a
household
power
outlet.
2.
Start
the
computer
and
turn
on the
camcorder
and
set
it
to
play
movies
(
(PLAY'~")
).'
.
3.
Connect
the
camcorder
to
the
computer
using
the
USB cable.
4.
Run
the
program
from
the
desktop
shortcut
or
from
Windows
Start
menu.
- Erasing all still images from the disc or
card
- Copying still images between the disc
and card
- Erasing all transfer orders
- Erasing all print orders
•
o Check the orientation
of
the USB cable and make sure you connect it properly.
o Operation may not work correctly depending on the specifications and settings
of
your computer.
o Recordings made
in
LP mode
in
Widescreen (16:9 aspect ratio) on a DVD-RW
that was initialized
in
VR mode cannot be transferred to the computer.
o DVD copies and DVD backup discs created with MyDVD for Canon cannot be
unfinalized using the camcorder.
o Do not connect the camcorder to a computer with the USB cable during the
following operations:
- Deleting all scenes
- Protecting the disc
- Setting the disc title
- Initializing the disc
- Finalizing or Unfinalizing the disc
106
Qng;"~h.sDc.hu.bb,jJog;c,(Wj."Q,dQ,,w.s,"xeC"~~')';!;";;1C.2;""";2""'"Bfo!i0S'i·cj'c/'J"'"""<;"";""';
If your computer is equipped with a DVD drive with writing capabilities, with the touch
of
one button you can make a copy
of
your DVD and burn it to an empty media in your
computer's drive without the need to run the program.
1.
Connect
the
camcorder
to
the
computer
but
do
not
run MyDVD
for
Canon.
Steps 1 through 3 above.
2.
Insert a finalized
disc
in
the
camcorder
and load a
brand
new
media in
your
computer's
DVD drive.
•
To
make a copy
of
a DVD-RW recorded
in
VR mode, load a blank DVD-RW
in
your
computer's DVD drive.
To
make a copy
of
a DVD-R
or
DVD-RW recorded
in
VIDEO
mode, you can load a blank DVD-R or DVD-RW.
•
You
can also use a fully erased DVD-RW disc instead
of
a brand new media.
However, depending on the condition
of
the disc, the operation will take longer.
To
fully erase a DVD-RW disc you will need DVD authoring/mastering software (for
example Roxio Record Now!) installed in your computer.
• When all the connections are completed and the software recognizes a blank media
ready
in
the DVD drive, the
~
IN'
(print/share) button will light on and the message
"PRESS
~
IN'
TO
COpy"
will appear on the camcorder's display.
• If you did not complete the online user registration after installing the software
(OJ 105), the
~
IN'
(print/share) button will not light up even though all the
preparations are completed correctly.
To Next Page
