134
o We recommend saving backups
of
memory card images on your computer's hard drive
or other external memory device. Image data
may
be corrupted
or
lost due to memory
card defects or exposure to static electricity. Canon Inc. makes no warranties for
corrupted
or
lost data.
o Do not turn off the camcorder, disconnect the power source or remove the memory
card while the card access indicator is flashing.
o Do not use memory cards in places subject to strong magnetic fields.
o Do not leave memory cards
in
places subject to high humidity and high temperature.
o Do not disassemble memory cards.
o Do not bend, drop, or subject memory cards to shocks and do not expose them to
water.
o Moving a memory card rapidly between hot and cold temperatures may cause
condensation to form on its external and internal surfaces.
If
condensation forms on the
card, put it aside until the droplets have evaporated completely.
o Do not touch
or
expose the terminals to dust
or
dirt.
o Check the direction before inserting the memory card. Forcing a memory card into the
slot jf it is not correctly oriented may damage the memory card
or
t he camcorder.
o Do not remove the label from the memory card, or affix other labels on the memory
card.
WARNING!
• The battery used
in
this device may present a fire or chemical burn hazard if
mishandled. Do not recharge, disassemble, heat above
100°C
(212
OF)
or incinerate
the battery.
• Replace the battery with a CR2025 made
by
Panasonic, Hitachi Maxell, Sony, Sanyo,
or with Duracell2025. Use
of
other batteries may present a risk
of
fire or explosion.
o Do not pick up the battery using tweezers
or
other metal tools as this will cause a short
circuit.
o Wipe the battery with a clean dry cloth to ensure proper contact.
o Keep the battery out
of
the reach
of
children.
If
swallowed, seek medical assistance
immediately. The battery case may break and the battery fluids may cause internal
damage.
o
Do
not disassemble, heat or immerse the battery in water to avoid the risk
of
explosion.
a~YU'L:ltl~iB~jliU;g@abJ§~cfutblumJJ"auJil¥"W;f~~~"fl'#CfOiC~~LL_'''WJj~.7d*"'
The camcorder has a built-in rechargeable lithium battery to keep the date/time and other
settings. The built-in lithium battery is recharged while you use the camcorder, however, it
discharges when the usage time is short, and will become totally discharged
if
you do not
use the camcorder for about 3 months.
In
such case, recharge the built-in lithium battery:
Connect the power adapter to the camcorder and leave it connected for 24 hours with the
power switch set to
OFF.
To Next Page
