3.
Remove the LCD display cover
and the back cover.
Detach the cable connectors with a pair
of
long-nosed pliers or simply cut them with
a pair
of
scissors.
4.
Being careful not to touch the part
indicated
in
the illustration
remove the additional screws.
n
~
Touching the condenser can
n present a serious risk
of
electrical
shock.
5.
Grab the battery firmly with
an
insulated pair of pliers or a similar
tool and twist it repeatedly to
detach it from the board.
Be
careful not to touch the part
indicated
in
the illustration.
~
Touching the condenser can
present a serious risk
of
electrical
shock.
Do
not touch
the condenser!
136
o Do not remove the covers for any other purpose than removing the battery for
recycling when disposing the camcorder.
o After removing the battery, keep it out
of
the reach
of
children. If swallowed,
seek medical assistance immediately. The battery case may break and the
battery fluids may cause internal damage.
To Next Page
