rUNe.
D.EFFECT5
~
-
3.
First, select
(.T)
the
current
digital effects
symbol
from the left
side
column and then select (....... )
the
[
""E
EFFECT]
option
from the bottom
bar
and press
(8)·
When recording still images
on
the memory card, only the
[III
BLK&WHT] effect is available. Select it and skip step 4 below.
4.
Select (....... ) an
effect
from the list.
The selected effect will be demonstrated on the current screen and will also be shown
in
a small animation at the right corner
of
the bottom bar.
5.
Press the FUNC.
button
to
save the setting and close the menu.
The symbol
of
the selected effect appears.
6.
Press the D.EFFECTS button.
• The symbol turns green, and the effect is activated.
• Pressing the D.EFFECTS button again deactivates the effect.
3.
First, select
(.T)
the
current
digital effects
symbol
from the left
side
column and then select (....... ) the
[mMULTI-S]
option
from the
bottom
bar
and press
(8)·
4.
Select
(.T)
the [S.SPEED] option and
set
(....... )
the
'--------'
transition speed.
• Manual: For capturing images manually.
• Fast: Every 4 frames
• Moderate (MOD.): Every 6 frames
• Slow: Every 8 frames
5.
Select
(.T)
the [S.SPLlT]
option
and
set
(....... ) the
number
of
split
images to capture.
6.
Press
(8)
to
save the setting and press the FUNC.
button
to
close the
menu.
"E!!" appears.
U~,~,.ltl~f~lJ~l~lmaJ;Je;r,~r,g§D~"%':4""1k';;'t~;;~'%"'+%"~';gf1'f!hfj%~,''''''",'!Jf;;'t>t1Jdi',';~''''~',";''~
(FUNC)
I
r;F
I~I
D.
EFFECT
OFF
I
(CO
59)
ff
1.
Set the
camcorder
to
record
movies
(
(CAMERA·-")
) and select a
recording program
other
than
EmID
or
PJ
.
2.
Press the FUNC. button.
73
To Next Page
Loading...
