Canon MF726Cdw - Removing the Delivery Unit

2. Remove the Secondary Transfer Feed Unit [1].
• 1 screw [2]
CAUTION:
When removing the screw, be careful not to lose the
guide cap [1] because the guide cap is removed
together with the screw.
[1]
[1]
[2]
1x
Removing the Delivery Unit
■ Preparation
1. Removing the Right Cover.(Refer to “Removing the
Right Cover” on page 120)
2. Removing the Left Cover.(Refer to “Removing the
Left Cover” on page 118)
3. Removing the Rear Upper Cover.(Refer to
“Removing the Rear Upper Cover” on page 123)
4. Removing the Rear Cover.(Refer to “Removing the
Rear Cover” on page 123)
5. Removing the Rear Lower Cover.(Refer to
“Removing the Rear Lower Cover” on page 123)
6. Removing the Rear Cover Rib Unit.(Refer to
“Removing the Rear Cover Rib Unit” on page 125)
7. Removing the Duplex Printing Reverse Drive Unit.
(Refer to “Removing the Duplex Reverse Drive Unit”
on page 179)
8. Removing the Fixing Assembly.(Refer to “Removing
the Fixing Assembly” on page 200)
9. Removing the ADF Unit + Reader Unit.(Refer to
“Removing the ADF Unit + Reader Unit” on page
130)
10. Removing the Upper Cover.(Refer to “Removing the
Upper Cover” on page 125)
■ Procedure
1. Remove the frame [1].
• 6 screws [2]
• 2 hooks [3]
[2]
[3]
[3]
[2]
[2]
[1]
[2]
6x
4. Disassembly/Assembly
220