Canon MF726Cdw - Page 280

COPIER > ADJUST > VIFADJ
Item Description
Details To adjust the setting value of C-color primary transfer bias.
Use case When an image failure occurs
Adj/set/operate method Enter the setting value (switch negative / positive by * key) and press Apply key.
Display/adj/set range -5 to 5
Default value 0
Related service mode COPIER > ADJUS T > VIFADJ > TR1-HV-Y
COPIER > ADJUS T > VIFADJ > TR1-HV-M
COPIER > ADJUS T > VIFADJ > TR1-HV-K
TR1-HV-K
Title Adjustment of primary transfer bias setting value (Bk)
Details To adjust the setting value of Bk-color primary transfer bias.
Use case When an image failure occurs
Adj/set/operate method Enter the setting value (switch negative / positive by * key) and press Apply key.
Display/adj/set range -5 to 5
Default value 0
Related service mode COPIER > ADJUST > VIFADJ > TR1-HV-Y
COPIER > ADJUST > VIFADJ > TR1-HV-M
COPIER > ADJUST > VIFADJ > TR1-HV-C
TR2SF-HV
Title Adjustment of secondary transfer bias setting value (front side)
Details To adjust the setting value of secondary transfer bias (front side).
Use case When an image failure occurs
Adj/set/operate method Enter the setting value (switch negative / positive by * key) and press Apply key.
Display/adj/set range -5 to 5
Default value 0
Related service mode COPIER > ADJUST > VIFADJ > TR2BK-HV
TR2BK-HV
Title Adjustment of secondary transfer bias setting value (back side)
Details To adjust the setting value of secondary transfer bias (back side).
Use case When an image failure occurs
Adj/set/operate method Enter the setting value (switch negative / positive by * key) and press Apply key.
Display/adj/set range -5 to 5
Default value 0
Related service mode COPIER > ADJUST > VIFADJ > TR2SF-HV
ICL-HV
Title Adjustment of bias setting value for ITB cleaning
Details To adjust the bias setting value to be used for ITB cleaning.
Use case When an image failure occurs
Adj/set/operate method Enter the setting value (switch negative / positive by * key) and press Apply key.
Display/adj/set range -5 to 5
Default value 0
FU-TMP
Title Adjustment of setting value of Fixing Roller surface temperature
Details To adjust the setting value of the surface temperature of the Fixing Roller.
Use case When an image failure occurs
Adj/set/operate method Enter the setting value (switch negative / positive by * key) and press Apply key.
Display/adj/set range -2 to 2
Default value 0
8. Service Mode
272