Canon MF726Cdw - Page 29

Section Outline Operation
LSTR
(Last rotation)
Interval from print job completion
to motor deactivation.
The last page of the print job is completely delivered. In this status, the laser scanner
unit and high-voltage bias PCBs are inactive. The printer starts the initial rotation
upon receiving a print command from the main controller during this status.
■ Print Sequence
See "Appendix" > "Print Sequence" in this manual.
■ Print Mode
The models of this series switch among 3 print modes to optimize the paper feed speed for printing.
Print mode Paper feed
speed
Paper type Print speed Remarks
Normal speed
mode
1/1 speed
Plain paper 1 (60 to 74 g/m
2
)
Plain paper 2 (70 to 84 g/m
2
)
Plain paper 3 (75 to 90 g/m
2
)
Recycled paper (60 to 74 g/m
2
)
Color paper (60 to 74 g/m
2
)
Thick paper 1 (86 to 119 g/m
2
)*
1
Thick paper 2 (120 to 128 g/m
2
)*
2
Coated paper 1 (100 to 110 g/m
2
)*
4
20 ppm*
6
Common to col-
or and B&W
printing
1/2 speed mode 1/2 speed
Thick paper 1 (91 to128 g/m
2
)*
1
Thick paper 2 (120 to 128 g/m
2
)*
2
Thick paper 3 (129 to163 g/m
2
)*
3
Coated paper 1 (100 to 110 g/m
2
)*
4
Postcards*
5
9.7 ppm*
6
1/3 speed mode 1/3 speed
Thick paper 3 (129 to 163 g/m
2
)*
2
Coated paper 2 (120 to 130 g/m
2
)
Coated paper 3 (155 to 165 g/m
2
)
Coated paper 4 (210 to 220 g/m
2
)
Transparency
Labels
Postcards*
5
Envelopes
7.6 ppm*
6
*1: For Thick Paper 1 (86 to 119 g/m
2
), switched to normal mode when environment temperature is 20 deg C and above, and
switched to 1/2 speed mode when the temperature is lower than 20 deg C.
*2: For Thick Paper 2 (120 to 128 g/m
2
), switched to normal mode when environment temperature is 20 deg C and above, and
switched to 1/2 speed mode when the temperature is lower than 20 deg C.
*3: For Ticick Paper 3 (129 to 163 g/m
2
), switched to 1/2 speed mode when environment temperature is 20 deg C and above,
and switched to 1/3 speed mode when the temperature is lower than 20 deg C.
*4: For Coated paper 1 (100 to 110 g/m
2
), switched to normal mode when environment temperature is 20 deg C and above, and
switched to 1/2 speed mode when the temperature is lower than 20 deg C.
*5: For Postcard, switched to 1/2 speed mode when environment temperature is 20 deg C and above, and switched to 1/3 speed
mode when the temperature is lower than 20 deg C.
*6: The fastest print speed in each mode.
2. Technical Explanation
21