Canon MF726Cdw - Page 36

Power-Saving Mode Status
Stand-by at power-OFF on the reader
Power-saving at power-OFF on the reader and the display (LCD)
Sleep Sleep 1 at power-OFF on the reader, engine and the display (LCD)
Sleep 2 at power-OFF on the reader and the engine.
Sleep 3 (3W sleep) at power-off on the reader, the engine and the display (LCD)
The main controller enters the power-saving mode.
Automatic shutdown* The Main Power Switch is turned OFF when a specified period of time has passed (default: 4 hours)
after the machine has entered sleep mode (excluding sleep 2).
*: In the case of a model without fax for EUR (MF724Cdw)
The auto sleep time has passed.
The auto sleep time has passed.
The auto sleep
time has passed.
↓A job is
generated
/completed.↑
←A job is generated/completed.→
The automatic shutdown time has passed.
The energy saver
key is pressed.
The energy saver key is pressed.
The energy saver key is pressed.
Hook detection
Hook detection
Automatically shifted
depending on the conditions
Service call
Power-off
Power-on
Standby
Control Panel
Reader
Engine
Controller
Energy saver
* The reader is turned ON
only when it is used.
Sleep 2
Sleep 1A
Sleep 1B Sleep 3
Service error
No service error (no error requiring a service visit) has occurred.
Explanation
of the status
Power-on
Power-saving
Power-off
Non-all-night
24V OFF
Non-all-night
24V ON
The energy saver
key is pressed.
Automatically shifted
depending on the conditions
2. Technical Explanation
28