Canon MF726Cdw - Page 83

● Fax Settings
Setting Information Case A Case B Case C
Basic Settings
Register Unit Telephone Number
Telephone Number Yes Yes No
Select Line Type Yes Yes Yes
Pulse Yes Yes Yes
Tone
Off-Hook Alarm Yes Yes Yes
Communication Management Settings
TX Start Speed Yes Yes Yes
RX Start Speed Yes Yes Yes
TX Function Settings
Change Default Setting Yes Yes Yes
2-Sided Original Yes Yes Yes
Resolution Yes Yes Yes
Density Yes Yes Yes
Sharpness Yes Yes Yes
Register Unit Name (Fax) Yes Yes Yes
ECM TX Yes Yes Yes
Set Pause Time Yes Yes Yes
Auto Redial Yes Yes Yes
Number of Times to Redial Yes Yes Yes
Redial Interval Yes Yes Yes
Redial When Error Occurs Yes Yes Yes
TX Terminal ID Yes Yes Yes
Print Position Yes Yes Yes
Mark Number as: Yes Yes Yes
Check Dial Tone Before Sending Yes Yes Yes
Allow Fax Driver TX Yes Yes Yes
Confirm Entered Fax Number Yes Yes Yes
Restrict Sequential Broadcast Yes Yes Yes
RX Function Settings
ECM RX Yes Yes Yes
Incoming Ring Yes Yes Yes
times Yes Yes Yes
Remote RX Yes Yes Yes
specific ID number Yes Yes Yes
Switch to Auto RX Yes Yes Yes
Switch to Auto RX Yes Yes Yes
Memory Lock Settings
Memory Lock PIN Yes Yes Yes
Report Print Yes Yes Yes
Memory Lock Time Yes Yes Yes
Memory Lock Start Time Yes Yes Yes
Memory Lock End Time Yes Yes Yes
RX Print Settings
Print on Both Sides Yes Yes Yes
Reduce RX Size Yes Yes Yes
Ratio Yes Yes Yes
Direction Yes Yes Yes
RX Page Footer Yes Yes Yes
Continue Printing When Amount in Cartridge Is Low Yes Yes Yes
Forwarding Settings
2. Technical Explanation
75