Ceia THS - Detection Menu

THS – FI022GB2K8v3 --- V - MAINTENANCE
65
Detection menu
Remote Possible settings Standard setting Parameter
Sensitivity
SE
0 - 299 -
Related to the current
product
Description Models
Sensitivity
Alarm trigger threshold: the smaller the object to be detected, the greater the sensitivity must be.
The parameter can be modified at operator level if parameter OA=ON
All models
Remote Possible settings Standard setting Parameter
TX program
TP
0 - 1799 0
Related to the current
product
Description Models
Analysis parameter of received signal
This parameter determines the optimum point of operation to minimise the signal generated by the product, and is set
automatically by the detector during the autolearn process.
For example, for a dry product the choice of TP=0 is the optimum, for a wet product a value around 900 is the
optimum.
All models,
except THS/MN
Remote Possible settings Standard setting Parameter
Band
BA
High / Medium / Low High
Related to the current
product
Description Models
Operating band
High: high band; Medium: medium band; Low: low band.
Parameter determined automatically by the system during the autolearn procedure. (if parameter MB =ON).
The parameter can also be adjusted manually: in general, the band should get lower as the product increases in
humidity or if a metallic film is present.
THS/3F
Remote Possible settings Standard setting Parameter
Analysis mode
AM
2 - 7
6
(2 on THS/MN)
Related to the current
product
Description Models
Received signal analysis mode
AM THS/MN Other THS models
2
Standard recovery time after an alarm
3
Fast recovery time after an alarm
4
Not applicable Reserved
5
Not applicable Reserved
6
Not applicable
Standard recovery time after an alarm, with
improved immunity against vibrations
7
Not applicable
Fast recovery time after an alarm, with improved
immunity against vibrations
All models