Cisco 7931G - Page 110

5-6
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Caller ID Displays caller identification such as a phone number,
name, or other descriptive text on the phone screen.
For more information, see:
• Cisco Unified Communications Manager
Administration Guide, Cisco Unified IP
Phone Configuration and Directory
Number Configuration.
• Cisco Unified Communications Manager
System Guide, Understanding Route
Plans.
• Cisco Unified Communications Manager
Features and Services Guide, Call Display
Restrictions.
Caller ID
Blocking
Blocks a user’s phone number or e-mail address. For more information, see:
• Cisco Unified Communications Manager
Administration Guide, Directory Number
Configuration and SIP Profile
Configuration.
• Cisco Unified Communications Manager
System Guide, Understanding Route
Plans.
Calling Party
Normalization
Globalizes or localizes the incoming calling party number
so that the appropriate calling number presentation
displays on the phone. Supports the international escape
character +.
For more information, see the Cisco Unified
Communications Features and Services Guide,
Calling Party Normalization.
Cisco Extension
Mobility
Allows a user temporarily to apply a phone number and
user profile settings to a shared Cisco Unified IP Phone by
logging into the Extension Mobility service on that phone.
Extension Mobility can be useful if users work from a
variety of locations within your company or if they share
a workspace with coworkers.
For more information, see the Cisco
Unified Communications Manager Features
and Services Guide, Cisco Extension Mobility.
Cisco Extension
Mobility
Change PIN
Enables a user to change the PIN from a Cisco Unified
IP Phone by using the Change Credentials service of a
Cisco Unified IP Phone.
Using the ChangePIN softkey on the Extension Mobility
logout screen
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Cisco Extension Mobility.
Cisco Extension
Mobility Cross
Cluster (EMCC)
Enables a user configured in a "home" cluster to log into
a Cisco Unified IP Phone in another "visiting" cluster.
Before you configure EMCC, configure Cisco Extension
Mobility on the Cisco Unified IP Phones.
Even though the Intercom feature works with Cisco
Extension Mobility (EM), it cannot be used with EMCC
because the feature must be enabled with a real phone
device. The Intercom feature cannot be enabled with
EM profiles.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, Cisco Extension Mobility
Cross Cluster.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference