EasyManuals Logo

Cisco 7931G Administration Guide

Cisco 7931G
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #165 background imageLoading...
Page #165 background image
8-13
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
Interval Conceal Ratio Ratio of concealment frames to speech frames in preceding 3-second interval of active speech. If
using voice activity detection (VAD), a longer interval may be required to accumulate 3 seconds of
active speech.
Max Conceal Ratio Highest interval concealment ratio from start of the voice stream.
Conceal Secs Number of seconds that have concealment events (lost frames) from the start of the voice stream
(includes severely concealed seconds).
Severely Conceal Secs Number of seconds that have more than 5 percent concealment events (lost frames) from the start of
the voice stream.
Latency
1
Estimate of the network latency, expressed in milliseconds. Represents a running average of the
round-trip delay, measured when RTCP receiver report blocks are received.
Max Jitter Maximum value of instantaneous jitter, in milliseconds.
Sender Size RTP packet size, in milliseconds, for the transmitted stream.
Sender Reports
Received
1
Number of times RTCP Sender Reports have been received.
Sender Report Time
Received
1
Last time at which an RTCP Sender Report was received.
Rcvr Size RTP packet size, in milliseconds, for the received stream.
Rcvr Discarded RTP packets received from network but discarded from jitter buffers.
Rcvr Reports
Received
1
Number of times RTCP Receiver Reports have been received.
Rcvr Report Time
Received
1
Last time at which an RTCP Receiver Report was received.
1. When the RTP Control Protocol is disabled, no data generates for this field and it displays as 0.
Table 8-5 Streaming Statistics Area Items (continued)
Item Description

Table of Contents

Other manuals for Cisco 7931G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7931G and is the answer not in the manual?

Cisco 7931G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Electromagnetic compatibilityFCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-FiNo
Networking standardsIEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface typeFast Ethernet
Supported network protocolsDHCP, TFTP, CDP
Lines quantity24 lines
Phonebook capacity- entries
Number of VoIP accounts-
Voice codecsG.711a, G.729A, G.729B, G.729ab
Volume controlDigital
Display resolution192 x 64 pixels
Display number of lines3 lines
Display number of colorsMonochrome
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Safety(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth229 mm
Width203 mm
Height178 mm
Weight1360 g

Related product manuals