Cisco Catalyst 3750 - Page 888

Index
IN-6
Catalyst 3750 MetroSwitch Software Configuration Guide
78-15870-01
command-line interface
See CLI
command modes
2-1
commands
abbreviating
2-4
no and default 2-4
setting privilege levels 7-8
community list, BGP 28-56
community strings
configuring
24-7
overview 24-4
config.text 3-11
configuration, initial
Express Setup
1-8
See also hardware installation guide
setup (CLI) program
1-8
configuration examples
ACLs and VLAN maps
25-29
IP ACLs 25-20
multi-VRF-CE 28-82
network 1-11
SNMP 24-14
VLAN maps 25-31
VMPS 10-29
configuration files
clearing the startup configuration
B-18
creating using a text editor B-9
default name 3-11
deleting a stored configuration B-19
described B-8
downloading
automatically
3-11
preparing B-10, B-12, B-16
reasons for B-8
using FTP B-13
using RCP B-16
using TFTP B-11
guidelines for creating and using B-8
invalid combinations when copying B-5
configuration files (continued)
limiting TFTP server access
24-13
obtaining with DHCP 3-7
password recovery disable considerations 7-5
specifying the filename 3-11
system contact and location information 24-13
types and location B-9
uploading
preparing
B-10, B-12, B-16
reasons for B-8
using FTP B-14
using RCP B-17
using TFTP B-11
configuration guidelines
802.1Q trunks
10-19
applying ACLs 25-18
applying MAC ACLs 25-26
auto-QoS 26-33
Auto-RP and BSR 31-9
EtherChannel 27-9
fallback bridging 33-3
hierarchical QoS 26-76
HSRP
authentication and timers
29-8
interfaces 29-4
priority 29-6
interface speed and duplex mode 9-13
IP multicast routing 31-8
MSTP 15-12, 16-9
multi-VRF CE 28-79
named ACLs 25-13
port-based authentication 8-11
port security 18-9
protected ports 18-5
router ACLs and VLAN maps 25-34
RSPAN 21-16
SDM templates 6-3
SNMP 24-6
SPAN 21-10