Configuring System Time
Defining SNTP Authentication
ESW 500 Series Switches Administration Guide 95
4
STEP 1 Click Monitor & Device Properties > System Management > Time > SNTP
Authentication. The
SNTP Authentication Page
opens:
SNTP Authentication Page
The
SNTP Authentication Page
contains the following fields:
• Enable SNTP Authentication — Indicates if authenticating an SNTP session
between the device and an SNTP server is enabled on the device. The
possible field values are:
-
Checked
— Authenticates SNTP sessions between the device and
SNTP server.
-
Unchecked
— Disables authenticating SNTP sessions between the
device and SNTP server.
• Encryption Key ID — Indicates the Key Identification used to authenticate the
SNTP server and device. The range is 1 - 4294967295.
• Authentication Key — Displays the key used for authentication.
• Trusted Key — Indicates the encryption key used (Unicast/Anycast) or elected
(Broadcast) to authenticate the SNTP server.
STEP 2 Click the Add button. The
Add SNTP Authentication Page
opens:
To Next Page
Loading...
