Cisco ESW 500 - Defining Interface Settings

Configuring VLANs
Defining Interface Settings
ESW 500 Series Switches Administration Guide 218
7
Defining Interface Settings
The VLAN Interface Setting Page provides parameters for managing ports that are
part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN
Port
Settings
page. All untagged packets arriving to the device are tagged by the ports
PVID.
STEP 1 Click VLAN & Port Settings > VLAN Management > Interface Settings. The VLAN
Interface Settings
Page opens:
VLAN Interface Setting Page
The
VLAN Interface Setting Page contains the following fields:
• Copy From Entry Number — Copies VLAN configuration from the specified
table entry.
• To Entry Number(s) — Assigns the copied VLAN configuration to the specified
table entry.
• Ports — Indicates that ports are described in the page.
• EtherChannels — Indicates that EtherChannels are described in the page.