Cisco ESW 500 - Defining Multicast Group

Configuring Multicast Forwarding
Defining Multicast Group
ESW 500 Series Switches Administration Guide 255
10
STEP 4 Click Apply. The IGMP Snooping Parameters are modified, and the device is
updated.
Defining Multicast Group
The Multicast Group Page displays the ports and EtherChannels that are members
of Multicast service groups. The Port and EtherChannel tables also reflect the
manner in which the port or EtherChannels joined the Multicast group. Ports can be
added either to existing groups or to new Multicast service groups.
The Multicast
Group Page
permits new Multicast service groups to be created. The Multicast
Group Page
also assigns ports to a specific Multicast service address group.
To define Multicast group:
STEP 1 Click VLAN & Port Settings > Multicast > Multicast Group. The Multicast Group
Page
opens:
Multicast Group Page
The
Multicast Group Page contains the following fields: