Configuring Device Security
Defining Dynamic ARP Inspection
ESW 500 Series Switches Administration Guide 197
5
STEP 1 Click Security > ARP Inspection > ARP Inspection List. The
ARP Inspection List
Page
opens:
ARP Inspection List Page
The
ARP Inspection List Page
contains the following fields:
• ARP Inspection List Name — Pull-down lists name of the Inspection List.
• Delete and Add Buttons — Delete or Add user-defined ARP Inspection Lists.
Static ARP Inspection Table
• IP Address — Specifies IP address included in ARP Binding Lists which is
checked against ARP requests and replies.
• MAC Address — Specifies MAC address included in ARP Binding Lists which
is checked against ARP requests and replies.
NOTE The Binding list cannot be added until an ARP list is added.
STEP 2 Click Add under ARP Inspection List Name. The
Add ARP list Page
opens:
To Next Page
Loading...
