Cisco ESW 500 - Modifying SNMP Community Settings

Configuring SNMP
Configuring SNMP Security
ESW 500 Series Switches Administration Guide 347
13
• Access Mode — Defines the access rights of the community. The possible
field values are:
- Read Only — Management access is restricted to read-only, and
changes cannot be made to the community.
- Read Write — Management access is read-write and changes can be
made to the device configuration, but not to the community.
- SNMP Admin — User has access to all device configuration options, as
well as permissions to modify the community.
• View Name — Contains a list of user-defined SNMP views.
• Advanced — Enables SNMP Advanced mode for a selected community and
contains the following field:
• Group Name — Defines advanced SNMP communities group names.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The SNMP Community is defined, and the device is updated.
Modifying SNMP Community Settings
STEP 1 Click Monitor & Device Properties > SNMP > Security > Communities. The
SNMP Communities Page opens:
STEP 2 Click the Edit Button. The Edit SNMP Community Page :
Edit SNMP Community Page
The
Edit SNMP Community Page contains the following fields:
• SNMP Management — Defines the management station IP address for which
the SNMP community is defined.