Cisco ESW 500 - Defining Dynamic Addresses

Defining Address Tables
Defining Dynamic Addresses
ESW 500 Series Switches Administration Guide 248
9
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The Static MAC Address is added, and the device is updated.
Defining Dynamic Addresses
The Dynamic Address Table contains the MAC addresses learned by monitoring
the source address for traffic entering the switch. When the destination address
for inbound traffic is found in the database, the packets intended for that address
are forwarded directly to the associated port. Otherwise, the traffic is flooded to
all ports.
The
Dynamic Page contains parameters for querying information in the Dynamic
MAC Address Table, including the interface type, MAC addresses, and VLAN. The
Dynamic MAC Address table contains information about the aging time before a
dynamic MAC address is erased. The Dynamic MAC Address table contains
address parameters by which packets are directly forwarded to the ports. The
Dynamic Address Table can be sorted by interface, VLAN, and MAC Address.