Cisco ESW 500 - Page 258

Defining Address Tables
Defining Static Addresses
ESW 500 Series Switches Administration Guide 247
9
- Delete on Timeout — The MAC address is deleted when a timeout
occurs.
- Secure — The MAC Address is defined for locked ports.
STEP 2 Click the Add button. The Add Static MAC Address Page opens:
Add Static MAC Address Page
The
Add Static MAC Address Page contains the following fields:
• Interface — Defines the interface to which the entry refers:
- Port — The specific port number to which the forwarding database
parameters refer.
- EtherChannel — The specific EtherChannel number to which the
forwarding database parameters refer.
• MAC Address — Defines the MAC address to which the entry refers.
• VLAN ID — Defines the VLAN ID number to which the entry refers.
• VLAN Name — Defines the VLAN name to which the entry refers.
• Status — Defines how the entry is created. The possible field values are:
- Permanent — The MAC address is permanent.
- Delete on Reset — The MAC address is deleted when the device is
reset.
- Delete on Timeout — The MAC address is deleted when a timeout
occurs.
- Secure — The MAC Address is defined for locked ports.