Cisco ESW 500 - Via HTTP; Active Image

Managing System Files
Active Image
ESW 500 Series Switches Administration Guide 368
14
• Destination File Type — Specifies the type of configuration file to be created.
The possible values are:
- Running Config — Contains the configuration currently valid on the
device.
- Starting Config — Contains the configuration which will be valid
following system startup or reboot. The Startup configuration is only
active after the device is reset.
- Backup Config — Contains a copy of the system configuration for
restoration following a shutdown or a fault.
Via HTTP
Use the Browse button to navigate to the file.
• File Name — Name of the source configuration file.
STEP 2 Define the relevant fields and filenames.
STEP 3 Click Apply. The Copy configuration is defined, and the device is updated.
Active Image
The Active Image Page allows network managers to select the Image files.
Images are activated only after the device is reset.