Cisco ESW 500 - Defining MSTP Interface Settings

Configuring Spanning Tree
Defining Multiple Spanning Tree
ESW 500 Series Switches Administration Guide 283
11
• Designated Root Bridge ID — Indicates the priority and MAC address of the
bridge with the lowest path cost to the instance ID.
• Root Port — Indicates the selected instance’s root port.
• Root Path Cost — Indicates the selected instance’s path cost.
• Bridge ID — Indicates the priority and MAC address of the selected instance.
• Remaining Hops — Indicates the number of hops remaining to the next
destination.
STEP 2 Define the relevant fields.
STEP 3 Click Apply. The MSTP Instance configuration is defined, and the device is
updated.
Defining MSTP Interface Settings
Network Administrators can define MSTP Instances settings using the MSTP
Interface Settings Page
.