Cisco ESW 500 - Defining VLAN Membership

Configuring VLANs
Defining VLAN Properties
ESW 500 Series Switches Administration Guide 212
7
STEP 3 Define the relevant fields.
STEP 4 In the Port List, select the ports to include in the VLAN and click the adjacent right
arrow. The selected ports then appear in the VLAN Members list.
STEP 5 Click Apply. The VLAN Settings are defined, and the device is updated.
Defining VLAN Membership
The Port to VLAN Page contains a table that maps VLAN parameters to ports.
Ports are assigned VLAN membership by toggling through the Port Control
settings.
STEP 1 Click VLAN & Port Settings > VLAN Management > Port to VLAN. The Port to
VLAN Page
opens:
Port to VLAN Page
The
Port to VLAN Page contains the following fields:
• VLAN ID — Selects the VLAN ID.