Cisco ESW 500 - Adding Rule to MAC Based ACL

Configuring Device Security
Defining Access Control
ESW 500 Series Switches Administration Guide 153
5
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The MAC Based ACL is defined, and the device is updated.
Adding Rule to MAC Based ACL
STEP 1 Click Security > Access Control Lists (ACL) > MAC Based ACL. The MAC Based
ACL
Page opens.
STEP 2 Select an existing ACL from the ACL Name drop-down list.
STEP 3 Click the Add Rule button. The Add Rule Page opens:
Add MAC Based Rule Page
The
Add MAC Based Rule Page contains the following fields:
• ACL Name — Displays the user-defined MAC based ACLs.
• New Rule Priority — Indicates the ACE priority, which determines which ACE is
matched to a packet on a first-match basis. The possible field values are 1-
2147483647.
• Source MAC Address