Getting Started
Performing Common Configuration Tasks
ESW 500 Series Switches Administration Guide 21
1
CDP Page
Review the ports for connecting IP Phones, PCs, Access Points and the uplink to
the Cisco UC520 or SR520. You can change the Voice VLAN from the default of
100 if required.
Configuring the VLAN Settings for the Switch
To add or edit the default VLAN settings, click on VLAN & Port Settings > VLAN
Management > Properties. The
Properties
page opens.
NOTE If the ESW 500 series switch is being deployed into a Cisco SBCS network,
the installation is plug and play. If the switch is being deployed into a non-
Cisco network, you will need to manually change VLAN settings.
To Next Page
Loading...
