Configuring Multicast Forwarding
Defining Multicast Group
ESW 500 Series Switches Administration Guide 257
10
• Bridge Multicast IP Address — Displays the IP address attached to the
Multicast Group.
• Bridge Multicast MAC Address — Displays the MAC address attached to the
Multicast Group.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The Multicast Group is added, and the device is updated.
Modifying a Multicast Group
STEP 1 Click VLAN & Port Settings > Multicast > Multicast Group. The
Multicast Group
Page
opens:
STEP 2 Click the Edit button. The
Edit Multicast Group Page
opens.
Edit Multicast Group Page
The
Edit Multicast Group Page
contains the following fields:
• VLAN ID — Displays the VLAN ID.
• Bridge IP Multicast — Displays the IP address attached to the Multicast Group.
• Bridge MAC Multicast — Displays the MAC address attached to the Multicast
Group.
• Interface — Displays the interface attached to the Multicast Group.
• Interface Status — Defines the interface status. The options are as follows:
To Next Page
Loading...
