Configuring Quality of Service
Defining QoS Basic Mode
ESW 500 Series Switches Administration Guide 329
12
• Interface — Displays the interface to which the entry refers.
• Policy Name — Displays the Policy name associated with the interface.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The QoS policy binding is modified, and the device is updated.
Defining QoS Basic Mode
The
Basic Mode Page
contains information for enabling Trust on the device.
Packets entering a QoS domain are classified at the edge of the QoS domain.
To define the Trust configuration:
STEP 1 Click Quality of Service > Basic Mode. The
Basic Mode Page
opens:
Basic Mode Page
The
Basic Mode Page
contains the following fields:
To Next Page
Loading...
