Cisco ESW 500 - Managing Cisco Discovery Protocol

Configuring SNMP
Defining Trap Management
ESW 500 Series Switches Administration Guide 348
13
• Community String — Defines the password used to authenticate the
management station to the device.
Configure either the Basic Mode or the Advanced Mode.
• Basic — Enables SNMP Basic mode for a selected community and contains the
following fields:
• Access Mode — Defines the access rights of the community. The possible
field values are:
- Read Only — Management access is restricted to read-only, and
changes cannot be made to the community.
- Read Write — Management access is read-write and changes can be
made to the device configuration, but not to the community.
- SNMP Admin — User has access to all device configuration options, as
well as permissions to modify the community.
• View Name — Contains a list of user-defined SNMP views.
• Advanced — Enables SNMP Advanced mode for a selected community and
contains the following fields:
- Group Name — Defines advanced SNMP communities group names.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The SNMP Community settings are defined, and the device is
updated.
Defining Trap Management
This section contains the following topics:
• Defining Trap Settings
• Configuring Station Management
• Defining SNMP Filter Settings
Defining Trap Settings
The Trap Settings Page contains parameters for defining SNMP notification
parameters.