Cisco ESW 500 - DNS Server Details; Mapping DNS Hosts

Configuring IP Information
Domain Name System
ESW 500 Series Switches Administration Guide 242
8
- Checked — Removes the selected DNS server
- Unchecked — Maintains the current DNS server list.
DNS Server Details
• DNS Server — Displays the DNS server’s IP address, up to four DNS servers
can be defined.
• Active Server — Specifies the DNS server that is currently active.
STEP 2 Click the Add button. The Add DNS Server Page opens:
Add DNS Server Page
The
Add DNS Server Page allows system administrators to define new DNS
servers. The
Add DNS Server Page page contains the following fields.
• DNS Server IP Address — Enter the DNS server’s IP address.
• Set DNS Server Active — Defines active status of the new DNS Server. The
possible values are:
- Checked — This new server becomes the active DNS Server.
- Unchecked — This new server is not the active DNS Server.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The DNS server is added, and the device is updated.
Mapping DNS Hosts
The Host Mapping Page provides information for defining DNS Host Mapping. To
define the DNS Host Mapping: