Cisco ESW 500 - Authenticated Hosts

Configuring Device Security
Defining 802.1x
ESW 500 Series Switches Administration Guide 147
5
- Discard — Discards the packets. This is the default value.
- Shut Down — Discards the packets and shuts down the port. The ports
remains shut down until reactivated, or until the device is reset.
• Enable Traps — Indicates if traps are enabled for Multiple Hosts. The possible
field values are:
- Checked — Indicates that traps are enabled for Multiple hosts.
- Unchecked — Indicates that traps are disabled for Multiple hosts.
• Trap Fre quency — Defines the time period by which traps are sent to the host.
The Trap Frequency (1-1000000) field can be defined only if multiple hosts are
disabled. The default is 10 seconds.
STEP 3 Modify the relevant fields.
STEP 4 Click Apply. The authentication settings are defined, and the device is updated.
Authenticated Hosts
The Authenticated Hosts Page contains a list of authenticated users.