Cisco ESW 500 - Upgrading Firmware

Getting Started
Performing Common Configuration Tasks
ESW 500 Series Switches Administration Guide 30
1
Save Configuration Page
The
Save Configuration Page contains the following fields:
Source File Name — Indicates the device configuration file to copy and the
intended usage of the copied file (Running, Startup, or Backup).
Destination File Name — Indicates the device configuration file to copy to and the
intended usage of the file (Running, Startup, or Backup).
Define the relevant fields and then Click Apply. The Configuration Files are
updated.
Another option to quickly save the Running Configuration to the Startup
Configuration is to click Save Configuration at the top of the page. This link is
initially grayed out. Once switch configuration changes are made, the link
becomes active.
Upgrading the Firmware on the Switch
The following steps show how to download, install, and make a new firmware
release the active image on the switch.