Cisco ESW 500 - Modifying RMON Event Log Settings

Viewing Statistics
Configuring RMON History
ESW 500 Series Switches Administration Guide 404
17
The Delete button deletes the selected RMON event.
STEP 2 Click the Add button. The Add RMON Events Page opens:
Add RMON Events Page
The
Add RMON Events Page contains the following fields:
• Event Entry — Indicates the event entry index number.
• Community — Displays the SNMP community string.
• Description — Displays a user-defined event description.
• Type — Describes the event type. Possible values are:
- None — No action occurs.
- Log — The device adds a log entry.
- Trap — The device sends a trap.
- Log and Trap — The device adds a log entry and sends a trap.
• Owner — Displays the device or user that defined the event.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The RMON event is added, and the device is updated.
Modifying RMON Event Log Settings
STEP 1 Click Statistics > RMON (Remote Management) > Events. The RMON Events Page
opens:
STEP 2 Click Edit. The Edit RMON Events Page opens: