Configuring Device Security
Defining Dynamic ARP Inspection
ESW 500 Series Switches Administration Guide 196
5
STEP 2 Click Edit. The
Edit Interface Settings Page
opens:
Edit Interface Settings Page
STEP 3 Define the fields.
STEP 4 Click Apply. The Trusted Interface’s configuration is modified, and the device is
updated.
Defining ARP Inspection List
The
ARP Inspection List Page
provides information for creating static ARP Binding
Lists. ARP Binding Lists contain the List Name, IP address and MAC address which
are validated against ARP requests and replies.
To add an ARP Inspection List entry:
To Next Page
Loading...
