Configuring IP Information
Defining DHCP Relay Interfaces
ESW 500 Series Switches Administration Guide 234
8
Add DHCP Server Page
The
Add DHCP Server Page
contains the following field:
• DHCP Server IP Address — Defines the IP address assigned to the DHCP
server.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The DHCP Server is defined, and the device is updated.
Defining DHCP Relay Interfaces
Enabling Relay functionality provides multiple interfaces to be configured for
establishing a DHCP Configuration with multiple DHCP servers to ensure
redundancy. IP Addresses are controlled and distributed one-by-one to avoid
storming the device.
To define the DHCP Relay configuration:
To Next Page
Loading...
